Bublue D10P pool cleaning robot

Bublue D10P pool cleaning robot

The Bublue D10P automates pool cleaning with a high-performance system designed for the pool floor, walls, and waterline. Its four active brushes, two suction ports, and a flow rate of 3566 GPH effectively collect dirt, sand, leaves, and other debris. Additionally, its 150 W three-axis motor with Bluehole Tech™ technology ensures stable and efficient operation. As it is a model with a cable, it can work without interruptions or battery limitations, while TangleEase™ technology helps reduce cable tangles during use. Bluesonic Path™ technology optimizes cleaning routes, and the mobile app allows you to monitor operation and adjust working modes without removing the robot from the water.

Effective dirt removal with each pass

The four active brushes of the Bublue D10P effectively remove the accumulated dirt on the bottom and walls of the pool, preparing it for subsequent suction. Its two suction ports and a flow rate of 3566 GPH allow for the collection of both fine particles and larger debris such as leaves or sand. All of this is supported by a three-axis 150 W motor with Bluehole Tech™ technology, which maintains a constant suction power and a uniform water flow to achieve a more efficient cleaning.

Large waste basket capacity

The dual suction system allows for collecting debris from both the front and back of the robot, reducing efficiency loss when changing direction. The Bublue D10P features two separate 3-liter filter baskets, providing a large capacity for debris and enabling extended cleaning cycles without the need for frequent emptying. The 180 µm filters capture fine particles such as sand and sediments, as well as larger debris.

Full coverage of the pool

The Bluesonic Path™ technology uses intelligent algorithms to efficiently guide the robot along the pool floor and walls. The device moves following predefined patterns, such as S-shaped or N-shaped routes, dynamically adapting the width of the path according to the pool's conditions. This reduces overlap between paths and prevents areas from being left uncleaned.

Remote control via app

The Bublue D10P robot is controlled through a mobile application that allows you to monitor its operation in real time. In RC mode, you can manually drive the robot and direct it to specific areas that require more intensive cleaning. The application also allows you to schedule cleaning times, select cleaning modes, define the cycle duration, adjust the path width, and activate the return to the waterline function. The 2.4 GHz Wi-Fi and Bluetooth connectivity, along with OTA updates, ensure a comfortable and up-to-date user experience.

Quick withdrawal and easy maintenance

Once the cleaning cycle is completed, the robot can automatically move to the waterline using the function available in the app, making it easier to remove it from the pool. A tricolor LED informs the operating status, parking next to the wall, or any possible errors. In addition, the power module control panel allows manual activation of the robot and selection of the mode and working time. Daily maintenance is very simple: just remove the filter baskets and rinse them with water.

Stable operation without interruptions

The design of the Bublue D10P is intended to move smoothly along the bottom of the pool, overcome obstacles, and climb steps, allowing for continuous cleaning without manual intervention. The TangleEase™ technology helps reduce cable tangling, avoiding unexpected stops during operation. Its UV-resistant casing and sealed construction allow for safe operation underwater at depths of up to 3 meters.

Included

• Pool cleaning robot
• Power module
• Carabiner
• Rope
• User manual