WYBOT Winny 200 wireless pool cleaning robot

Wybot Winny 200 Wireless Pool Cleaning Robot

The Wybot Winny 200 is a wireless robot designed for the automatic cleaning of above-ground pools up to 60 m². It stands out for its 80-minute autonomy and 7.5 m³/h filtration capacity. Thanks to its 3200 mAh battery, it eliminates the need for cables, increasing convenience and safety of use. Its compact design and 3.3 kg weight facilitate transportation, and its IPX8 waterproof rating allows trouble-free operation even when submerged up to 2.5 meters deep.

Effective Cleaning and Increased Suction Power

The robot is equipped with an enhanced 30 W suction system, allowing it to effectively collect sand, leaves, and small debris. Its design prevents debris buildup, so once vacuumed, the dirt remains in the device without the risk of returning to the water. Additionally, with an approximate speed of 16 m/min, the Winny 200 effectively covers the entire cleaning surface.

Two-Stage Filtration System

The Winny 200 uses a two-stage filtration system consisting of a foam filter and a 180 µm density tray. This combination effectively captures both larger debris and fine particles. The filter is easy to remove and clean: simply rinse it with water.

Intelligent Poolside Parking

Thanks to its smart sensor technology, when the battery is low, the robot automatically heads towards the pool wall and stops nearby. This, along with the included hook, makes it easy to remove the device from the water.

Wireless Convenience and Easy Operation

The robot's operation has been simplified to the maximum: just press the button and immerse the device in water for it to start cleaning automatically. Additionally, its wireless design eliminates the need for cables and any range limitations. Relax and let the Winny 200 take care of the cleaning!

Lightweight Design, Long Battery Life, and Fast Charging

Its lightweight and integrated handle make transporting the robot easy, and its 80-minute autonomy is sufficient for thorough cleaning of even a large 60 m² pool. The robot charges in approximately 4 hours, and its integrated LED indicator shows the charging status.

Included in the set

• Cleaning robot
• Filter basket (foam + 180 µm filter)
• Handle and grip
• Scraper x2
• Hook for removing the robot from the water
• Screws
• Charger
• User manual

Technical specifications

```